Fully compliant with 1394 Open Host Controller Interface Specification (Release 1.1)
Fully compliant with provisions of IEEE Std 1394-1995 for a high-performance serial bus and IEEE Std 1394a-2000
Fully interoperable with FireWire and i.LINK implementations of IEEE Std 1394
Compliant with Intel Mobile Power Guideline 2000
Full IEEE Std 1394a-2000 support includes: connection debounce, arbitrated short reset, multispeed concatenation, arbitration acceleration, fly-by concatenation, and port disable/suspend/resume
Power-down features to conserve energy in battery-powered applications include: automatic device power down during suspend, PCI power management for link-layer, and inactive ports powered down
Ultralow-power sleep mode
Three IEEE Std 1394a-2000 fully compliant cable ports at 100M bits/s, 200M bits/s, and 400M bits/s
Cable ports monitor line conditions for active connection to remote node
Cable power presence monitoring
Separate cable bias (TPBIAS) for each port
1.8-V core logic with universal PCI interfaces compatible with 3.3-V and 5-V PCI signaling environments
Physical write posting of up to three outstanding transactions
PCI burst transfers and deep FIFOs to tolerate large host latency
PCI_CLKRUN\ protocol
External cycle timer control for customized synchronization
Extended resume signaling for compatibility with legacy DV components
PHY-link logic performs system initialization and arbitration functions
PHY-link encode and decode functions included for data-strobe bit level encoding
PHY-link incoming data resynchronized to local clock
Low-cost 24.576-MHz crystal provides transmit and receive data at 100M bits/s, 200M bits/s, and 400M bits/s
Node power class information signaling for system power management
Serial ROM interface supports 2-wire serial EEPROM devices
Two general-purpose I/Os
Register bits give software control of contender bit, power class bits, link active control bit, and IEEE Std 1394a-2000 features
Fabricated in advanced low-power CMOS process
Isochronous receive dual-buffer mode
Out-of-order pipelining for asynchronous transmit requests
Register access fail interrupt when the PHY SCLK is not active
PCI power-management D0, D1, D2, and D3 power states
Initial bandwidth available and initial channels available registers
PME\ support per 1394 Open Host Controller Interface Specification
and IEEE Std 1394a-2000
